Description The new IQ8X-80-M-US microinverter, designed for higher voltage 80/160, 88/176, and 96-cell solar modules. These are part of the Enphase IQ8 series – the industry’s first microgrid-forming, software defined microinverters with split-phase power conversion capability to convert DC power to AC power efficiently. The leading microinverter brand due to advanced technology, features, and warranty. The 1:1 configuration with your solar modules means maximum performance energy yield & system reliability in any conditions. IQ8X Microinverter is the latest addition to the Enphase IQ8 family, designed to support PV modules with higher input DC voltage and cell counts, such as 80-half-cut cells, 88-half-cut cells and 96-cells. If your solar module’s Voc is higher than 50V, then the IQ8X is your best option for Canadian climates. The brain of this advanced semiconductor-based microinverter is Enphase’s proprietary application-specific integrated circuit (ASIC) which enables the microinverter to operate in grid-tied or off-grid modes. This chip is built in advanced 55nm technology with high speed digital logic and has super-fast response times to changing loads and grid events, alleviating constraints on battery sizing for home energy systems. IQ8X-80-M-US Microinverter Features Easy to install Lightweight and compact with plug-n-play connectors Power Line Communication (PLC) between components Faster installation with simple two-wire cabling High productivity and reliability Produce power even when the grid is down* More than one million cumulative hours of testing Class II double-insulated enclosure Optimized for the latest high-powered PV modules Microgrid-forming Complies with the latest advanced grid support** Remote automatic updates for the latest grid requirements Configurable to support a wide range of grid profiles Meets CA Rule 21 (UL 1741-SA) requirements . IQ8X-80-M-US Specifications In Brief INPUT Commonly used module pairings : 320–540W Module compatibility : To meet compatibility, PV modules must be within the following maximum input DC voltage and maximum module Isc MPPT voltage range : 43 – 60V Operating range : 25-79.5 Min/max start voltage : 30-79.5V Max input DC voltage : 79.5V Maximum continuous operating DC current : 10A Maximum input DC short-circuit current : 16A Max DC current [module Isc] : 13A PV array configuration… 1×1 Ungrounded array; No additional DC side protection required; AC side protection requires max 20A per branch circuit OUTPUT Peak output power : 384VA Max continuous output power : 380VA Nominal (L-L) voltage/range : 240 / 211 – 264VAC Max continuous output current : 1.58A Nominal frequency : 60Hz Extended frequency range : 47 – 68Hz Max units per 20 A (L-L) branch circuit : 10 Peak Efficiency : 97.3% CEC Weighted Efficiency : 96.5% Night-time Power Consumption : 60mW MECHANICAL Ambient temperature range : -40ºC to 60ºC (-40ºF to 140ºF) Relative humidity range : 4% to 100% (condensing) DC Connector type : MC4 Dimensions (HxWxD) : 212 mm (8.3”) x 175 mm (6.9”) x 30.2 mm (1.2”) Weight : 1.1 kg (2.43 lbs) Cooling : Natural convection – no fans Approved for wet locations : Yes Enclosure : Class II double-insulated, corrosion resistant polymeric Environ. category / UV exposure rating : NEMA Type 6 / outdoor CERTIFICATIONS CA Rule 21 (UL 1741-SA), UL 62109-1, UL1741/IEEE1547, FCC Part 15 Class B, ICES-0003 Class B, CAN/CSA-C22.2 NO. 107.1-01 This product is UL Listed as PV Rapid Shut Down Equipment and conforms with NEC 2014, NEC 2017, and NEC 2020 section 690.12 and C22.1-2018 Rule 64-218 Rapid Shutdown of PV Systems, for AC and DC conductors, when installed according to manufacturer’s instructions. Additional information, plus full literature, can be found on the Enphase website Need help choosing? Send us a note! IQ8X Micro Inverter by Enphase
