AC Trunk Cable #10AWG For Micro Inverters by APSystems

Description This is the #10AWG trunk cable for your APSystems DS3 Series, YC600, & QS1 Micro Inverter system. This 2.4 meter (7.8 feet) trunk cable will link the AC output from each of your YC600 or QS1/QS1A micro-inverters. 2.4m between connections. Priced per inverter connection point. The number of trunk cable connections is determined by the number of inverters you have on the string. Normally DS3 inverter strings have a maximum of 12 solar modules (6 inverters), while the QS1 allows up to 3 inverters, or 2 inverters in the case of the QS1A. The Trunk Cable should enter a suitable rail-mounted junction box, or roof-flashing junction box for transition to home-run AC wiring. Each trunk cable string should be terminated at the non-service end of the cable with an AC Bus End Cap, and any unused trunk cable connectors can be plugged with an AC Bus TCONN Caps. To unlock the micro-inverter’s connector from the AC Bus Trunk Cable a Connector Unlock Tool is needed (although it is possible to do with fine screwdrivers & manual dexterity). AC Trunk Cable #10AWG For Micro Inverters by APSystems