1) Close Nipple 1/4″ both ends male. 2) Long Nipple 1/4″ same as above, but longer (11/2″)unthreaded mid-section. 3) Long Nipple 1/4″ same as above, but longer (2″) unthreaded mid-section. 4) Close nipple 3/8″ both ends male. 5) Long nipple 3/8″ same as above, but longer (11/2″) unthreaded mid-section. 6) Close nipple 1/2″ both ends male. 7) Long nipple 1/2″ same as above, but longer (11/2″) unthreaded mid-section. 8) Bushing 1/4″ male x 1/8″ female. 9) Bushing 3/8″ male x 1/4″ female. 10) Bushing 1/2″ male x 3/8″ female. 11) Adapter 1/4″ male x 1/4″ female. 12) Adapter 3/8″ female x 1/4″ male. 13) Adapter 3/8″ male x 3/8” female. 14) Adapter 1/2″ female x 1/4″ male. 15) Adapter 1/2″ female x 3/8″ male. 16) Reducer coupling 1/4″ female x 1/8″ female. 17) Reducer coupling 3/8″ female x 1/4″ female. 18) Coupling 1/8″ female x 1/8″ female. 19) Coupling 1/4″ female x 1/4″ female. 20) Coupling 3/8″ female x 3/8″ female. 21) Flare connector 3/8″ flare male x 1/4″ pipe thread male. 22) Flare connector 3/8″ flare male x 3/8″ pipe thread male. 23) Female 90 degree elbow 1/8″ female x 1/8″ female. 24) Female 90 degree elbow 1/4″ female x 1/4″ female. 25) Female 90 degree elbow 3/8″ female x 3/8″ female. 26) Street elbow 90 degree 1/4″ male x 1/4″ female. 27) Street elbow 90 degree 1/2″ male x 1/2″ female. 28) Street elbow 45 degree 1/4″ male x 1/4″ female. 29) Street elbow 45 degree 3/8″ male x 3/8″ female. 30) Female Tee 3/8″ female x 3/8″ female x 3/8″ female. 31) Street Tee 3/8″ female x 3/8″ female x 3/8″ male. 32) 90 degree elbow barb 3/8″ male thread x 1/2″ (to hose) barb. 33) Hose mender 1/4″ barb to 1/4″ barb. 34) Hose barb 1/4″ barb (hose to pipe) x 1/4″ male thread. 35) Hose barb 1/2″ barb (hose to pipe) x 1/2″ male. 36) Hose barb 5/8″ barb (hose to pipe) x 1/2″ male. 37) Hose barb 3/4″ barb (hose to pipe) x 1/2″ male. 38) Hose barb 3/4″ barb (hose to pipe) x 3/4″ male. 39) Hex nipple reducer 3/8″ male x 1/4″ male. 40) Hex nipple reducer 1/4″ male x 1/8″ male. 41) Hex nipple 1/4″ male x 1/4″ male. 42) Hex nipple 3/8″ male x 3/8″ male. 43) Female swivel connector 3/4″ female x 3/4″ barb. 44) Male connector 3/4″ male x 3/4″ barb. 45) Reducer 3/4″ male x 3/8″ female. 46) Quick connect 1/8″ open female. 47) Quick connect 1/8″ open male. 48) Quick connect 1/4″ female with open male end. 49) Quick connect 1/4″ female with open female end. 50) Quick connect 3/8″ female with open male end. 51) Quick connect 3/8″ female with open female end. 52) High pressure valve 1/4″ female 1/4″ female. 3000 psi. 53) Brass valve 1/2″ female x 1/2″ female. 54) Quick connect 1/2″ female x 1/2″ male open end. 55) Quick connect 1/2″ female x 1/2″ female open end. 56) Quick connect 1/8″ female x 1/8″ open male end. 57) Quick connect 1/8″ female x 1/8″ open female end. 58) Quick connect 3/8″ closed female. 59) Quick connect 1/4″ closed female. 60) Quick connect 3/8″ closed male. 61) Quick connect 1/4″ closed male. 62) Quick connect 1/4″ closed female. Stainless Steel. 63) Quick connect 1/8″ closed female. 64) Quick connect 1/4″ closed male. Stainless Steel. 65) Quick connect 1/8″ closed male. 66) Bushing 3/8″ male x garden hose male. 67) Bushing 3/8″ male x garden hose female swivel. Instantly converts a garden hose to take a 3/8″ thread so you can connect a 3/8″ QD and plug it in directly to your truck-mount. 68) Male SAE 45 degrees Ridged 1/4″ Male x 1/2″ Barb. 69) NPTF/ NPTF 1/8″ Male x 1/8″ Male. 70) 2FTX 1/8″ 37degree Flare/NPTF 1/8″ x 1/8″ Flare 37 degree. 71) Wand filter 1/4″. Goes between the wand valve and QD. 72) T-jet filter 1/4″. This holds a T-jet and has a filter. 73) 1/4″ on one side, the other side has a ferrule that makes it attachable to an 1/8″ tube (usually found on a wand after the valve) with a nut. 74) Adapter 3/8″ male x 3/4″ female.(usually used to reduce 3/4″ male on the water softener to 3/8″ male, so you can attach a 3/8″ QD – #58 or #60 in the picture on left) All fittings are brass & pipe thread unless indicated otherwise.
